SPEEDYSCAF
Layher Commercial & Industrial
SpeedyScaf Equipment
SPEEDYSCAF
QUICK AND EASY.
With the Speedy assembly frame Lightweight, the Layher SpeedyScaf equipment has been the recognized leader for decades in insertion-frame systems. Modern, fast and robust, making it ideal for work on facades. Layher SpeedyScaf is, thanks to its versatile and well thought-out range of parts, equally economical to use in scaffolding construction and in professional trades.
QUICK AND EASY
With just six basic elements and a few manual operations, this logically erected scaffolding is “speedy” because it is assembled without bolts. Numerous expansion parts permit optimum adaptation to existing building geometries – without much extra effort during assembly. SpeedyScaf is available in different scaffolding widths, made of hot-dip galvanized steel or lightweight aluminum, for every application.
Guaranteed with building authority approvals:
- SpeedyScaf 100 Steel Z-8.1-840 and
- SpeedyScaf 70 Steel Z-8.1-16.2
- SpeedyScaf 70 Aluminum Z-8.1-844
ALWAYS THE RIGHT SCAFFOLDING DECK FOR EVERY APPLICATION
The Steel Deck LW
Using higher-tensile steel grades, a thinner material and an intelligent combination of profiles and material concentrations at structurally relevant areas, it has proved possible to reduce the weight of the steel deck, already established in the market, by up to 2.2 kg or 10 % – while retaining its high load-bearing capacity. That makes this steel deck lighter, handier and more effective. Discover the benefits that the steel deck LW from Layher has to offer: Because Layher Lightweight is about more than just weight.
- Better grip thanks to optimised steel cap and to the new longitudinal profile, ensuring more ergonomic handling and greater safety.
- Weight saving of up to 10 % while retaining a high load-bearing capacity – meaning lower labour costs, an increase in truck capacity and improved ergonomics.
- Can be combined with steel decks of previous generations during assembly and transport.
- Strong feeling of safety when walking on the decks thanks to transverse reinforcements in the surface.
- Can be used up to load class 6 (≤ 2.07 m) and in standard and roof brick guards.
The Stalu Deck
Durable aluminum deck with sturdy and riveted steel cap.
- For use up to load class 6 depending on deck length.
- Available lengths from 0.73 m to 3.07 m.
- Available widths are 0.19 m, 0.32 m and 0.61 m.
- Integrated with Allround und SpeedyScaf.
Transition Decks
Cover Plate 320
The steel gap sheeet is used to cover the gap between two scaffolding decks both in Allround and in SpeedyScaf. Can be used for gap widths up to 20 cm.
Telescoping U-System Deck
Cover ledger 110 LW are available in various lengths for gap-free work surfaces between the main scaffolding decks and the bracket decks.
Cover Ledger 110 LW
The standard requires that the gap between decks should not exceed 25 mm. Depending on bay width and deck laying variants with differing deck widths (0.61 m, 0.32 m and 0.19 m), compliance with the 25 mm gap width requirement is not always possible. This is why a deck was designed to adapt infinitely to all possible gap dimensions that might occur. It allows gaps from 40–255 mm to be closed conveniently.
- Same load classes as in the steel decks.
- Decks can be fixed in place – no more slipping.
- Rapid assembly.
- No additional fitting of gap covers required.
- Gap-free and closed surface, infinite adjustment.
Further solutions can be found in the Allround Scaffolding Price List:
To the Downloads
ALWAYS THE RIGHT SCAFFOLDING DECK FOR EVERY APPLICATION
The Steel Deck LW
Using higher-tensile steel grades, a thinner material and an intelligent combination of profiles and material concentrations at structurally relevant areas, it has proved possible to reduce the weight of the steel deck, already established in the market, by up to 2.2 kg or 10 % – while retaining its high load-bearing capacity. That makes this steel deck lighter, handier and more effective. Discover the benefits that the steel deck LW from Layher has to offer: Because Layher Lightweight is about more than just weight.
- Better grip thanks to optimised steel cap and to the new longitudinal profile, ensuring more ergonomic handling and greater safety.
- Weight saving of up to 10 % while retaining a high load-bearing capacity – meaning lower labour costs, an increase in truck capacity and improved ergonomics.
- Can be combined with steel decks of previous generations during assembly and transport.
- Strong feeling of safety when walking on the decks thanks to transverse reinforcements in the surface.
- Can be used up to load class 6 (≤ 2.07 m) and in standard and roof brick guards.
The Stalu Deck
Durable aluminum deck with sturdy and riveted steel cap.
- For use up to load class 6 depending on deck length.
- Available lengths from 0.73 m to 3.07 m.
- Available widths are 0.19 m, 0.32 m and 0.61 m.
- Integrated with Allround und SpeedyScaf.
Transition Decks
Cover Plate 320
The steel gap sheeet is used to cover the gap between two scaffolding decks both in Allround and in SpeedyScaf. Can be used for gap widths up to 20 cm.
Telescoping U-System Deck
Cover ledger 110 LW are available in various lengths for gap-free work surfaces between the main scaffolding decks and the bracket decks.
Cover Ledger 110 LW
The standard requires that the gap between decks should not exceed 25 mm. Depending on bay width and deck laying variants with differing deck widths (0.61 m, 0.32 m and 0.19 m), compliance with the 25 mm gap width requirement is not always possible. This is why a deck was designed to adapt infinitely to all possible gap dimensions that might occur. It allows gaps from 40–255 mm to be closed conveniently.
- Same load classes as in the steel decks.
- Decks can be fixed in place – no more slipping.
- Rapid assembly.
- No additional fitting of gap covers required.
- Gap-free and closed surface, infinite adjustment.
Further solutions can be found in the Allround Scaffolding Price List:
To the Downloads
LAYHER, THE INTEGRATED SCAFFOLDING SYSTEM: APPLICATION-ORIENTED ACCESSORIES
Brackets
SpeedyScaf can be quickly widened inwards or outwards: The brackets are fastened with the welded-on half-coupler in the corner plate area or in corner areas as swivel brackets, using the spigot of the Speedy assembly frame Lightweight, to form a deck level with the main scaffolding.
Anchoring
The scaffolding must be anchored vertically to and parallel with the façade, with resistance to both tensile and compressive stress. Layher offers quicker and safer solutions:
The SpeedyScaf wall tie, which is fastened by a double coupler in the corner plate area of the Speedy assembly frame Lightweight and is supported with the fork plate on the channel section of the Speedy assembly frame Lightweight.
The wall tie, which is connected with two double couplers to both upright tubes.
The SpeedyScaf Corner Plate Coupler
For outside and inside brackets, continuous anchoring directly on the corner plate of the Speedy assembly frame Lightweight using the top hole is possible and ensures a greater height clearance at the top scaffolding level.
The ETICS tie is used for a controlled introduction of high forces, parallel to the facade, when using thermal insulation compound systems.
The Speedy Vario wall tie system permits structurally favourable anchoring anywhere inside the scaffolding level, even outside the connectors of the assembly frames, for example in buildings with many windows, skeleton structures or in similar situations.
Roof Brick Guards
Roof brick guards must be used when there is any risk of slipping on the roof, and they are mandatory for a roof inclination of 20° and above. Either brick guards or protection nets can be attached to the brick guard support.
Stairway Access
The aluminium platform and comfort stairways offer increased safety, convenience and speed when ascending the tower. Transporting material is made easier by using the work decks as all-round walkways too.
Stairways are highly recommended when:
- extensive amounts of material have to be transported via this access,
- the ascent height in the scaffolding exceeds 10 m, or
- extensive work has to be carried out.
The landing-type stairway is connected using the U-distance coupler to the main scaffolding.
Protective Roofs
Layher weather protection roofs can be used in a number of variants depending on their span, the snow load or the wind load. That saves you real money when planning temporary weather protection roofs. For easy use on the site, clearly set-out material and loading capacity tables for snow and wind loads are available for you. Protective roofs are not a one-off solution for Layher, but a standard product – this ensures readiness for immediate delivery.
Protect System
With its Protect System, Layher offers an enclosure system that fits in with Allround Scaffolding and SpeedyScaf. It is used for example for pedestrian protection in combination with the Allround Bridging System and also for environmental protection and noise reduction. Highly economical to use thanks to quick and easy assembly in a simple and logical assembly sequence, and the frequent use of a few system components. The Layher Protect System is not a one-off solution for Layher, but a standard product – this ensures readiness for immediate delivery.
- Only a small number of individual parts.
- Designed for regular use.
- Visually attractive.
- Quick, easy and logical assembly.
LAYHER, THE INTEGRATED SCAFFOLDING SYSTEM: APPLICATION-ORIENTED ACCESSORIES
Brackets
SpeedyScaf can be quickly widened inwards or outwards: The brackets are fastened with the welded-on half-coupler in the corner plate area or in corner areas as swivel brackets, using the spigot of the Speedy assembly frame Lightweight, to form a deck level with the main scaffolding.
Anchoring
The scaffolding must be anchored vertically to and parallel with the façade, with resistance to both tensile and compressive stress. Layher offers quicker and safer solutions:
The SpeedyScaf wall tie, which is fastened by a double coupler in the corner plate area of the Speedy assembly frame Lightweight and is supported with the fork plate on the channel section of the Speedy assembly frame Lightweight.
The wall tie, which is connected with two double couplers to both upright tubes.
The SpeedyScaf Corner Plate Coupler
For outside and inside brackets, continuous anchoring directly on the corner plate of the Speedy assembly frame Lightweight using the top hole is possible and ensures a greater height clearance at the top scaffolding level.
The ETICS tie is used for a controlled introduction of high forces, parallel to the facade, when using thermal insulation compound systems.
The Speedy Vario wall tie system permits structurally favourable anchoring anywhere inside the scaffolding level, even outside the connectors of the assembly frames, for example in buildings with many windows, skeleton structures or in similar situations.
Roof Brick Guards
Roof brick guards must be used when there is any risk of slipping on the roof, and they are mandatory for a roof inclination of 20° and above. Either brick guards or protection nets can be attached to the brick guard support.
Stairway Access
The aluminium platform and comfort stairways offer increased safety, convenience and speed when ascending the tower. Transporting material is made easier by using the work decks as all-round walkways too.
Stairways are highly recommended when:
- extensive amounts of material have to be transported via this access,
- the ascent height in the scaffolding exceeds 10 m, or
- extensive work has to be carried out.
The landing-type stairway is connected using the U-distance coupler to the main scaffolding.
Protective Roofs
Layher weather protection roofs can be used in a number of variants depending on their span, the snow load or the wind load. That saves you real money when planning temporary weather protection roofs. For easy use on the site, clearly set-out material and loading capacity tables for snow and wind loads are available for you. Protective roofs are not a one-off solution for Layher, but a standard product – this ensures readiness for immediate delivery.
Protect System
With its Protect System, Layher offers an enclosure system that fits in with Allround Scaffolding and SpeedyScaf. It is used for example for pedestrian protection in combination with the Allround Bridging System and also for environmental protection and noise reduction. Highly economical to use thanks to quick and easy assembly in a simple and logical assembly sequence, and the frequent use of a few system components. The Layher Protect System is not a one-off solution for Layher, but a standard product – this ensures readiness for immediate delivery.
- Only a small number of individual parts.
- Designed for regular use.
- Visually attractive.
- Quick, easy and logical assembly.
LAYPLAN CLASSIC AND LAYPLAN CAD
Time and material are crucial factors in scaffolding construction. To make the most efficient use of both, the Layher range includes the integrated software solution LayPLAN SUITE. Several software packages are on offer for different requirements: LayPLAN CLASSIC, LayPLAN CAD.
AVAILABILITY ASSURED
CLOSE SHIPPING ACCESS
- We have a dense delivery network with multiple locations in the USA and CA and can deliver reliably.
- We have all standard parts in large quantities in stock.
- We can also produce large quantities in a short time.
